Fiault : Tow truck & Equipment Sales
- Phone +33 (0)2 43 04 72 63
- Opening hours Monday to Friday, 8am - 12pm / 1:30pm - 5:30pm
Fiault : Tow truck & Equipment Sales
PLAT'FIX PF21 ALU
On chassis cab : 3T5 to 5T
(Fitted on a 13-pin tow plug and reinforced suspensions)
PLAT'FIX PF21 ALU, fixed bed, pneumatic, car transporter
-U profile galvanised bed bolted to the back of the cabin
-Independent air cushion suspension permiting lowering to ground from cabin
-Electric compressor with reservoir with valve
-Four wheels 195x50x13, spare wheel
-Hot galvanisation of chassis and all metal components
-Fixed load bed with two different inclinations
-Structure entirely soldered aluminium
-Two aluminum loading ramps, manually pivoting at the rear of the equipment
-Integrated wheel arches with mud guards
-Reinforced aluminium sheet bed with nonslip finish (RIB/NERVURE) and full length holes (working width 2000mm)
-Bar to protect the cabin with two rubber stops
-Four ton electric (12v) winch with wired remote control and twenty metres of cable
-A remote control COME-UP for winch (winding - unwinding)
-Four adjustable wheel clamps on bed
-Lightbar 1200mm type XPERT with 2 beacons, a central light and sign WRECKER (on cabin)
-Three vests, three cones, shovel and broom with mounts
-Two fire extinguishers mounted in a secure locker
-A sandbox for absorbent product with stand
-A plastic toolbox 600mm
-An adjustable LED work light fixed to the front of the equipment
-A return pulley type DIABOLO with 4 sockets in the floor and support
-Bed constructed entirely in aluminium, no paint
-VEHICLE CONFORMS TO REGULATIONS
Dimensions :
-Exterior bed length = 5100 mm
-Exterior bed width = 2100 mm
Non-contractual pictures. They can differ depending on the equipment, chassis and location of accessories.
PLAT'FIX PF21 ALU
00-PF21
[ Open for more informations ] [ Fold up ]
PLAT'FIX PF21 ALU, fixed bed, pneumatic, car transporter
-U profile galvanised bed bolted to the back of the cabin
-Independent air cushion suspension permiting lowering to ground from cabin
-Electric compressor with reservoir with valve
-Four wheels 195x50x13, spare wheel
-Hot galvanisation of chassis and all metal components
-Fixed load bed with two different inclinations
-Structure entirely soldered aluminium
-Two aluminum loading ramps, manually pivoting at the rear of the equipment
-Integrated wheel arches with mud guards
-Bed constructed entirely in aluminium, no paint
-VEHICLE CONFORMS TO REGULATIONS
Dimensions :
-Exterior bed length = 5100 mm
-Exterior bed width = 2100 mm
Extruded aluminium floor type AUTOPORTANT
0309M095
[ Open for more informations ] [ Fold up ]
Extruded aluminium floor type AUTOPORTANT (edges with a flat, useful width 2080mm instead of 2000mm) replacing the floor with aluminium tear plates with rib
Four ton electric (12v) winch
1102M010
[ Open for more informations ] [ Fold up ]
Four ton electric (12v) winch with wired remote control and twenty metres of cable
Replacing the fixed winch cable hook with a rotating hook
1104M040
[ Open for more informations ] [ Fold up ]
Replacing the fixed winch cable hook with a rotating hook
A rubber end stop for winch cable
1104M050
[ Open for more informations ] [ Fold up ]
A rubber end stop for winch cable
A hook type 2 with shackle on winch cable
1109M010
[ Open for more informations ] [ Fold up ]
A hook type 2 with shackle on winch cable
Manual translation of the winch
1110M010
[ Open for more informations ] [ Fold up ]
Manual translation of the winch
Bar to protect the cabin with two rubber stops
0303M015
[ Open for more informations ] [ Fold up ]
Bar to protect the cabin with two rubber stops
High bar to protect the cabin type FLY with two rubber stops
0303M025
[ Open for more informations ] [ Fold up ]
-High bar to protect the cabin type FLY with two rubber stops
A fixed ball hook diam. 50 on the front of the platform
0508M010
[ Open for more informations ] [ Fold up ]
A fixed ball hook diam. 50 on the front of the platform
A fixed ball hook diam. 50 on the rear of the equipment
0508M040
[ Open for more informations ] [ Fold up ]
A fixed ball hook diam. 50 on the rear of the equipment
Four adjustable wheel clamps on bed
0501M010
[ Open for more informations ] [ Fold up ]
Four adjustable wheel clamps on bed
A work light fitted to the front of the equipment
0101M010
[ Open for more informations ] [ Fold up ]
A work light fitted to the front of the equipment
Two integrated work lights at the head of the platform
0101M020
[ Open for more informations ] [ Fold up ]
Two integrated work lights at the head of the platform
Four work lights fitted to the front of the equipment
0101M030
[ Open for more informations ] [ Fold up ]
Four work lights fitted to the front of the equipment
A work light fitted at the rear of the equipment
0101M040
[ Open for more informations ] [ Fold up ]
A work light fitted at the rear of the equipment
Two work lights fitted at the rear of the equipment
0101M050
[ Open for more informations ] [ Fold up ]
Two work lights fitted at the rear of the equipment
Two peripheral LED lighting working lights installed at the bottom of the equipment (1 per side)
0106M010
[ Open for more informations ] [ Fold up ]
Two peripheral LED lighting working lights installed at the bottom of the equipment (1 per side)
Four peripheral LED lighting working lights installed at the bottom of the equipment (2 per side)
0106M020
[ Open for more informations ] [ Fold up ]
Four peripheral LED lighting working lights installed at the bottom of the equipment (2 per side)
Two peripheral LED lighting working lights installed at the top of the FLY(1 per side)
0106M050
[ Open for more informations ] [ Fold up ]
Two peripheral LED lighting working lights installed at the top of the FLY(1 per side)
A remote control COME-UP for winch (winding - unwinding)
0902M035
[ Open for more informations ] [ Fold up ]
A remote control COME-UP for winch (winding - unwinding)
A remote control for winch, tilt and slide of the platform and working light (optional)
0902M045
[ Open for more informations ] [ Fold up ]
A remote control for winch, tilt and slide of the platform and working light (optional)
One beacon fitted on the top of the cabin
0203M010
[ Open for more informations ] [ Fold up ]
One beacon fitted on the top of the cabin
Two beacons fitted on the top of the cabin
0203M020
[ Open for more informations ] [ Fold up ]
Two beacons fitted on the top of the cabin
Lightbar 1200mm type XPERT with 2 beacons, a central light and sign WRECKER
0201M010
[ Open for more informations ] [ Fold up ]
Lightbar 1200mm type XPERT with 2 beacons, a central light and sign WRECKER
Lightbar 1450mm type XPERT with 4 beacons, a central light and sign WRECKER
0201M020
[ Open for more informations ] [ Fold up ]
Lightbar 1450mm type XPERT with 4 beacons, a central light and sign WRECKER
Delux SKY AIR 1420 flasher bar with 18 LEDS and BREAKDOWN sign
0201M040
[ Open for more informations ] [ Fold up ]
Delux SKY AIR 1420 flasher bar with 18 LEDS and BREAKDOWN sign
Reminder of traffic lights in the XPERT lightbar
0201M080
[ Open for more informations ] [ Fold up ]
Reminder of traffic lights in the XPERT lightbar
Four white lighting leds flash : 2 on the front + 2 on the rear (not homologated)
0204M010
[ Open for more informations ] [ Fold up ]
Four white lighting leds flash : 2 on the front + 2 on the rear (not homologated)
Three vests, three cones, shovel and broom with mounts
0706M010
[ Open for more informations ] [ Fold up ]
Three vests, three cones, shovel and broom with mounts
A sandbox for absorbent product with support
0704M010
[ Open for more informations ] [ Fold up ]
A sandbox for absorbent product with support
Two fire extinguishers mounted in a secure locker
0705M010
[ Open for more informations ] [ Fold up ]
Two fire extinguishers mounted in a secure locker
A plastic toolbox 600mm
0401M010
[ Open for more informations ] [ Fold up ]
A plastic toolbox 600mm
LED ceiling lighting in a toolbox
0107M010
[ Open for more informations ] [ Fold up ]
LED ceiling lighting in a toolbox
An open box with 3 plastic 10 liter jerricans with support
0404M010
[ Open for more informations ] [ Fold up ]
An open box with 3 plastic 10 liter jerricans with support
An open box with 3 steel 10 liter jerricans with support
0404M020
[ Open for more informations ] [ Fold up ]
An open box with 3 steel 10 liter jerricans with support
A washstand tank with faucet on a support
0404M060
[ Open for more informations ] [ Fold up ]
A washstand tank with faucet on a support
Two wheel dollies type "CHARIOTTE " (without support)
0502M060
[ Open for more informations ] [ Fold up ]
Two wheel dollies type "CHARIOTTE " (without support) (maximum speed: 10 Km/h)
Two aluminum support on the bar to protect the cabin for two wheel dollies type "CHARIOTTE" (without dollies)
0502M070
[ Open for more informations ] [ Fold up ]
Two aluminum support on the bar to protect the cabin for two wheel dollies type "CHARIOTTE" (without dollies)
An open support on the equipment for two wheel dollies type "CHARIOTTE" (without dollies)
0502M080
[ Open for more informations ] [ Fold up ]
An open support on the equipment for two wheel dollies type "CHARIOTTE" (without dollies)
Two jumper cables with a 12V plug on the front right of the equipment
1202M010
[ Open for more informations ] [ Fold up ]
Two jumper cables with a 12V plug on the front right of the equipment
Two jumper cables with a 12V plug in the right rear overhang of the equipment
1202M030
[ Open for more informations ] [ Fold up ]
Two jumper cables with a 12V plug in the right rear overhang of the equipment
A special motorcycle wedge with an articulated and adjustable shoe
0503M010
[ Open for more informations ] [ Fold up ]
A special motorcycle wedge with an articulated and adjustable shoe for fitting the wheel, 2 ratchet straps, 1 short traction sling, 1 special motorcycle handlebar strap and a storage rack on the equipment
A return pulley type DIABOLO with 4 sockets in the floor and support
1108M015
[ Open for more informations ] [ Fold up ]
A return pulley type DIABOLO with 4 sockets in the floor and support
Two aluminum load ramps with hydraulic pivoting
0506M160
[ Open for more informations ] [ Fold up ]
Two aluminum load ramps with hydraulic pivoting
Replacement of the two manual pivoting ramps by an integral hydraulically sliding ramp
0506M150
[ Open for more informations ] [ Fold up ]
Replacement of the two manual pivoting ramps by an integral hydraulically sliding ramp with two hydraulic cylinders powered by an electric pump and a remote control (for PF19-PF21)
Anti-slip aluminium protectors on top of the two sides of the platform
0301M110
[ Open for more informations ] [ Fold up ]
Anti-slip aluminium protectors on top of the two sides of the platform
A special lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 1200x35mm
0601M055
[ Open for more informations ] [ Fold up ]
A special lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 1200x35mm
A 3 points lashing strap for light vehicle
0601M050
[ Open for more informations ] [ Fold up ]
A 3 points lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 3000x50mm
Two lateral aluminum side panels (1 per side
0310M090
[ Open for more informations ] [ Fold up ]
Two lateral aluminum side removable panels (1 per side) can be fitted between the front of the platform and 1 removable post on the equipment
Four lateral aluminum side removable panels (2 per side)
0310M110
[ Open for more informations ] [ Fold up ]
Four lateral aluminum side removable panels (2 per side) can be fitted between the front of the platform and 1 removable post on the equipment
Rear view camera in color with flat screen in the cabin
0803M010
[ Open for more informations ] [ Fold up ]
Rear view camera in color with flat screen in the cabin
Installation of an air intake in the hydraulic controls toolbox
1205M020
[ Open for more informations ] [ Fold up ]
Installation of an air intake in the hydraulic controls toolbox
White reflective tape on the edge of the platform
0801M010
[ Open for more informations ] [ Fold up ]
White reflective tape on the edge of the platform
Orange reflective tape on the edge of the platform
0801M020
[ Open for more informations ] [ Fold up ]
Orange reflective tape on the edge of the platform
Vehicle approval with GVWR 5T (depending on chassis)
0707M020
[ Open for more informations ] [ Fold up ]
Vehicle approval with GVWR 5T (depending on chassis)
Side and rear underride bars for compliance with the GVWR> 3T5
0707M030
[ Open for more informations ] [ Fold up ]
Side and rear underride bars for compliance with the GVWR> 3T5
Painting of platform side
0313M015
[ Open for more informations ] [ Fold up ]
Painting of platform side in standard colour finish RAL
"CARTE BLANCHE" FOR FRENCH REGULATION (ONLY COMPULSORY FOR RECOVERY IN FRANCE)
0707M010
[ Open for more informations ] [ Fold up ]
"CARTE BLANCHE" FOR FRENCH REGULATION (ONLY COMPULSORY FOR RECOVERY IN FRANCE)
In order to generate your summary sheet, please fill in this contact form. We will contact you as soon as possible.
![[New]](/gallery/actualities/79-thumb.jpeg)
