Fiault : Tow truck & Equipment Sales
- Phone +33 (0)2 43 04 72 63
- Opening hours Monday to Friday, 8am - 12pm / 1:30pm - 5:30pm
Fiault : Tow truck & Equipment Sales
Non-contractual pictures. They can differ depending on the equipment, chassis and location of accessories.
Stylized plastic ABS body in the wheelbase and rear overhang
0301M010
Stylized plastic ABS body in the wheelbase and rear overhang (for light vehicle 3T5) painted in a standard RAL color (to define) :
Stylized aluminum body in the wheelbase in anodized aluminum profiles (unpainted) height 500mm with rear fenders in polyurethane
0301M015
Stylized aluminum body in the wheelbase in anodized aluminum profiles (unpainted) height 500mm with rear fenders in polyurethane
Stylized polyester body in the wheelbase (for chassis cab from 10T to 19T)
0301M020
Stylized polyester body in the wheelbase with rear fenders in polyurethane (for chassis cab from 10T to 19T) painted in a RAL color standard =
tylized aluminum body in the wheelbase height 600mm with rear fenders in polyurethane (for chassis from 12T to 32T)
0301M030
Stylized aluminum body in the wheelbase height 600mm with rear fenders in polyurethane (for chassis from 12T to 32T, with tool box only opening from above behind the aluminum body) painted in a standard color RAL =
Full stylized polyester fenders painted in a standard color same as body (not included)
0301M040
Full stylized polyester fenders painted in a standard color same as body (not included)
Polyester rear overhang (without wings) with a box for the hydraulic controls at the right rear and a tool box at the left rear
0301M050
Polyester rear overhang (without wings) with a box for the hydraulic controls at the right rear and a tool box at the left rear with hinged doors (for chassis from 10T to 32T), painted in a standard color (not metallic) same as body
Replacement of doors on fairing with curtains
0301M051
-Replacement of the hinged doors on the rear fairing modules with aluminum sliding curtains
Fairing under base for Plat'Fix pf21
0301M055
- Underbody fairing in stylized aluminum sheet (on PF21)
Painting of the fairings in 2 standard unvarnished tones
0301M060
-Painting of the fairings in 2 standard unvarnished tones
Painting of the fairings in 2 standard tones and varnish
0301M070
-Painting of the fairings in 2 standard tones and varnish
Painting of the fairings in 1 metallic tone and varnish
0301M080
-Painting of the fairings in 1 metallic tone and varnish
Painting of the fairings in 2 metallic tones and varnish
0301M090
-Painting of the fairings in 2 metallic tones and varnish
Self-adhesive anti-slip strips above the edges
0301M100
-Anti-slip self-adhesive strips on the top of the rims and cycle guards
Anti-slip aluminium protectors on top of the two sides of the platform
0301M110
Anti-slip aluminium protectors on top of the two sides of the platform
Stainless steel protections on the side of the platform with flat 10mm border
0301M111
Stainless steel protections on the side of the platform with flat 10mm border
Luxury finish with protective strips on the sides
0301M120
-Luxury finish with protective rubber strips in aluminum rails on both sides of the tabletop
Installation of a front bumper (3t to 6t chassis)
0301M130
-Installation of a front push bumper with a rubber protection plate on chassis from 3T to 6T (not approved)
Installation of a front push bumper (6t to 13t chassis)
0301M140
-Installation of a front push bumper with a rubber protection plate on chassis from 6T to 13T (not approved)
Installation of a front push bumper (13t to 19t chassis)
0301M150
-Installation of a front push bumper with a rubber protection plate on chassis from 13T to 26T (not approved)
Body with integral removable tarpaulin on aluminum rackets interlocking on the front
0301M160
Body with integral removable tarpaulin on aluminum rackets interlocking on the front and sides of the platform. White nylon tarpaulin with fixing eyelets and tensioners with hooks on the lower perimeter (5000x2100x1850) (PF18-PF19-PF20-PF21-PF30-trailers)
Bodywork with full aluminum covering 7000mm
0301M170
-Body with removable full cover on interlocking aluminum hoops on the front and sides of the platform. White nylon tarpaulin with fixing eyelets and tensioners with hooks on the lower perimeter (7000x2550x2000) on chassis GVW greater than 10T
Bodywork with integral rolling aluminum tarpaulin 7000mm
0301M180
-Body with full tarpaulin on rolling aluminum structure with 4 height-adjustable guide wheels allowing the entire movement from the ground to the platform via the winch. White nylon tarpaulin with fixing eyelets and tensioners with hooks on the lower edge, opening at the rear and on both sides on chassis GVW greater than 6T (7000x2550x1750) (PF30-PF60)
Body with sliding full sliding tarpaulin type LIB, a closed front face of the platform over the entire height
0301M185
Body with sliding full sliding tarpaulin type LIB, a closed front face of the platform over the entire height, steel arch type tarpaulin hooves sliding on carrier rollers in a rail fixed side of the lateral banks. Standard color nylon tarpaulin with integrated webbing and tensioner system. Sliding of the roof and accordion type with stacking on the front and manual deployment.
Useful height = 2750 mm (to be specified)
Effective width = 2450 mm (for outdoor use 2550 mm)
Effective length = 6000 to 7500 mm (according to chassis)
Bodywork with rigid white cpr panels 6500mm
0301M190
-Bodywork with rigid white CPR panels with translucent polyester roof, 4 rear half doors, 1 side door on the right side. Lower sealing by aluminum sheeting on steel frame fixed to the subframe. White panels without paint.
External dimensions: Length = 6700mm - Width= 2550mm - Height= 2800mm
Bodywork with rigid white cpr panels 8500mm
0301M200
-Bodywork with rigid white CPR panels with translucent polyester roof, 4 rear half doors, 1 side door on the right side. Lower sealing by aluminum sheeting on steel frame fixed to the subframe. White panels without paint.
External dimensions: Length = 8500mm - Width= 2550mm - Height= 2800mm
Aerodynamic polyester deflector on cabin
0301M205
- Polyester aerodynamic deflector on the cabin
Hyperlift bodywork simplified version
0301M210
"SIMPLIFIED" VERSION BODYWORK FOR HYPERLIFT (weight: 2300 kg)
-Cladding on each side of the chassis in 3mm thick electro-galvanized steel sheet with 2 independent bodywork elements installed on the subframe by elastic clamping on anti-vibration rubber mounts
-Integrated wheel arches with wrap-around fenders and splash guards
-Hydraulic distributors recessed in a trunk with door at the rear right
- Tool box, transverse front with a hinged door at each end
-Storage rack for forks and accessories
-Rear signaling with a standard light on each side
-Side signage in accordance with the highway code
- Painting of the bodywork in a single standard tone, indicate the RAL:
-Weight: 2000 kg
Hyperlift bodywork standard version
0301M220
"STANDARD" VERSION BODYWORK FOR HYPERLIFT (weight: 3000 kg)
-Covering on each side of the chassis in 3mm thick electro-galvanized steel sheet, with 2 independent bodywork elements installed on the subframe by elastic clamping on anti-vibration rubber pads
-Integrated wheel arches with wrap-around fenders and splash guards
-Hydraulic distributors recessed in a trunk
-Storage boxes in the upper part of the body, over the entire length with doors hinged upwards on standard hinges positioned on the outside, gas stays to hold the doors in the open position, stainless steel locks on each of the doors
-Storage rack for forks and accessories
- Protective rubber mat inside each trunk
-Ceiling light inside each trunk
-Standard "FLY" type front gantry
-Rear signaling with a standard light on each side
-Painting of the bodywork in one standard varnished polyurethane tone, indicate the RAL:
-Weight: 3000 kg
Hyperlift bodywork luxury version
0301M230
"LUXURY" VERSION BODYWORK FOR HYPERLIFT (weight: 3000 kg)
-Covering on each side of the chassis in 3mm thick electro-galvanized steel sheet, with 2 independent bodywork elements installed on the subframe by elastic clamping on anti-vibration rubber pads
-Integrated wheel arches with wrap-around fenders and splash guards
-Hydraulic distributors recessed in a trunk at the rear right
-Storage boxes in the upper and lower parts of the bodywork over the entire length with vertically sliding curtains in anodized and white painted aluminum
-Storage rack for forks and accessories
- Protective rubber mat inside each trunk
-Ceiling light inside each trunk
-Luxury "FLY" type front gantry with Aluminum lining
-Rear signaling with LED lights on each side
-Side lighting integrated on both sides in the lower part with 6 lights (3 x side)
-Painting of the bodywork in one standard varnished polyurethane tone, indicate the RAL:
Hyperlift aluminum bodywork replacing steel
0301M240
-Supplement for aluminum bodywork replacing the electro-galvanized steel bodywork (on HYPERLIFT)
Covered body with rigid white panels and extendible roof (for PLAT'SOL COVERED BODY)
0301M250
COVERED BODY WITH RIGID WHITE PANELS AND EXTENDIBLE ROOF (FOR PLAT'SOL COVERED BODY)
-Aluminum roof without translucent part with hydraulic elevation by 4 hydraulics cylinders
-Lateral opening by door on the right (width 1000mm)
-Rear opening with 4 separate leaves with hooking on the tip of the equipment
-Painting of rigid white panels
-Painting of white rear frame
-Neon lighting on the interior sides (4 neon lights)
-Two LED work lights at the front of the body (lighting oriented towards the rear)
-Two LED work lights at the rear of the body (lighting oriented towards the inside)
Replacement of the 2 doors by 2 aluminum curtains (pf3000)
0301M260
-Replacement of the 2 transverse trunk doors with 2 anodized aluminum curtains (on PF3000) (price on quote)
Interior chest layout with drawers on the right (pf3000)
0301M270
- Interior layout of the chest with sliding drawers on the right side (on PF3000) (price on estimate)
Interior layout of chest with 2-sided drawers (pf3000)
0301M280
-Interior layout of the trunk with sliding drawers on both left and right sides (on PF3000) (price on quote)
Four protective covers for wheel dollies type "FOURRIERE" and for wheel dollies type "GO-JACK" in BLACK color
0302M010
Four protective covers for wheel dollies type "FOURRIERE" and for wheel dollies type "GO-JACK" in BLACK color
Supply and installation of chrome 4x4 bull bar
0302M020
Supply and installation of chrome 4x4 bull bar
Supply and installation of a sheet steel bull bar
0302M025
Supply and installation of a sheet steel bull bar with cutting for lights and cooling with rubber protection BLACK or painting or sticker in RED and WHITE for 4x4 (not homologated)
Supply and installation of a sun screen above the windshield
0302M050
Supply and installation of a sun screen above the windshield
An open aluminum tray fitted in the rear part of the cabin
0302M060
An open aluminum tray fitted in the rear part of the cabin and accessible through the side doors (on 4x4 deep cabin)
An half open aluminum tray fitted in the rear part of the cabin and accessible through the side doors
0302M061
An half open aluminum tray fitted in the rear part of the cabin and accessible through the side doors (on 4x4 deep cabin)
Supply a kit for electronic declutching of the front axle with a switch in the cab to obtain 2-wheel drive in slow version
0302M070
Supply a kit for electronic declutching of the front axle with a switch in the cab to obtain 2-wheel drive in slow version (not available as standard) to improve the turning radius in basements or other delicate situations (on Toyota Hilux )
Supply and installation of two disengageable hubs on the front axle
0302M080
Supply and installation of two disengageable hubs on the front axle
Adaptation of foot-steps in aluminium
0302M090
Adaptation of foot-steps in aluminium
Adaptation of a second battery in the engine compartment
0302M100
Adaptation of a second battery in the engine compartment for intensive use of the equipment (on Maxilift PF3000)
Closing plate on the back of the standard roll bar with supports
0303M010
-Closing plate on the back of the standard roll-bar with supports for chains and hooks
Bar to protect the cabin with two rubber stops
0303M015
Bar to protect the cabin with two rubber stops
Front roll-bar reinforces special tp low version
0303M016
-Reinforced front roll bar special TP low version with cabin protection sheeting (height 800 mm)
Closing panel on the back of the roll-bar with storage bins
0303M020
-Closing plate on the back of the standard roll-bar with closed storage bins on each side of the winch
High bar to protect the cabin type FLY with two rubber stops
0303M025
-High bar to protect the cabin type FLY with two rubber stops
High bar to protect the cabin type FLY luxury model with rounded corners and two rubber stops
0303M026
High bar to protect the cabin type FLY luxury model with rounded corners and two rubber stops
Roll-bar raised to protect the cabine type FLY and stainless steel handles
0303M030
Roll-bar raised to protect the cabine type FLY and stainless steel handles
Stylized interior lining of the FLY with sheets of aluminum checkered
0303M035
Stylized interior lining of the FLY with sheets of aluminum checkered
Fly type front roll bar version 2
0303M040
-FLY type version 2 front roll bar raised at cabin level with stylized side cheeks, FIAULT logo and checkered aluminum interior lining
Fly-type front roll-bar version 3
0303M050
-FLY version 3 type front roll bar raised at cabin level with stylized side cheeks, FIAULT logo, aluminum interior lining and complete closure of the smooth aluminum front face
High front bar special Public Works with steel plate in lower part
0303M055
High front bar special Public Works with steel plate in lower part and protective grating of cabin in high part, 2 tool boxes on each side of the winch and 2 protective wooden board
Special public works front roll-bar with steel sheeting and lockers
0303M056
-Special TP type LOX front roll bar with steel sheeting over the entire height with 2 boxes positioned vertically on the cabin side with covers
Installation of the fly on a fixed, integral support
0303M060
-Installation of the FLY on a fixed support attached to the subframe
Roll-bar protection for trailer
0303M070
-Reinforced protective roll bar with 2 special rubber bumpers for 2500-3200B trailer
A winch spare wheel
0308M010
A winch spare wheel holder secured to the side of the chassis
A spare wheel carrier with a fixed frame at the rear
0308M020
-A spare wheel carrier with frame attached to the rear of the chassis
A spare wheel holder with fixed frame on the front
0308M030
-A spare wheel carrier with frame fixed on the roll-bar at the front of the tray
Rear, side mounted two hydraulic stabilisers with separate controls and manual distribution in the rear overhang of the vehicle
0308M035
Rear, side mounted two hydraulic stabilisers with separate controls and manual distribution in the rear overhang of the vehicle
Rear, side mounted two hydraulic stabilisers with separate controls and manual distribution
0308M040
Rear, side mounted two hydraulic stabilisers with separate controls and manual distribution (bearing width 2500 mm)
Rear, side mounted two hydraulic stabilisers with anchoring fingers on the ground
0308M045
Rear, side mounted two hydraulic stabilisers with anchoring fingers on the ground with separate controls and manual distribution
Two adjustable rear roller type stabilisers and a hydraulically swiveling bumper
0308M046
Two adjustable rear roller type stabilisers and a hydraulically swiveling bumper with 2 hydraulics cylinders for trailer hook
Two hydraulic rear stabilizer legs with oblique external positioning and 3500mm lateral hydraulic extension
0308M047
-Two hydraulic rear stabilizer legs with oblique external positioning and 3500mm lateral hydraulic extension, with ground anchors and removable floor protection pad, separate manual hydraulic distributor for each cylinder (instead of standard crutches)
Two hydraulic rear stands 5000mm hyperlift
0308M048
-Two hydraulic rear stabilization stands with external oblique positioning and lateral hydraulic extension to 5000mm, with ground anchoring fingers and removable ground protection pad, a hydraulic distributor with separate manual control for each cylinder (replacing the stands standard) (on HYPERLIFT)
Two front stabilizing crutches positioned obliquely at the side of the chassis
0308M049
-Two front stabilizing crutches positioned obliquely at the side of the chassis, with independent hydraulic lowering, ground anchoring fingers and hinged and tilting protection pads, a manual hydraulic distributor for each kickstand, integration into the bodywork (on HYPERLIFT)
Shortening or lengthening of wheelbase 3t5 to 6t
0308M060
- Shortening or lengthening of a chassis-cab from 3T5 to 6T between 2 nearest wheelbase dimensions (on estimate)
Shortening or lengthening of wheelbase 8t to 19t
0308M070
-Shortening or lengthening of a chassis cab from 8T to 19T between 2 closest wheelbase dimensions (on quote)
Certificate of authorization for chassis modification ptac<10t
0308M080
-Supplement for obtaining the authorization certificate for modification of a RENAULT-IVECO-VOLVO chassis of -10T for wheelbase or GVWR
Chassis modification authorization certificate ptac>10t
0308M090
-Supplement for obtaining the authorization certificate for modification of a RENAULT –IVECO-VOLVO chassis of +10T for wheelbase or GVWR
Adaptation of a minimum anti-pitching weight block under the original bumper
0308M100
Adaptation of a minimum anti-pitching weight block under the original bumper for load shedding compliance and improvement of load stability
Adaptation of an optimal anti-pitching weight block under the original bumper
0308M105
Adaptation of an optimal anti-pitching weight block under the original bumper for load shedding compliance and improvement of load stability
Installation and supply of a step for Iveco Daily
0308M110
-Installation and supply of two aluminum running boards for IVECO DAILY double cabin
Installation of a concrete ballast behind the cab to obtain a maximum load on the front axle
0308M120
-Installation of a concrete ballast behind the cab to obtain a maximum load on the front axle for a better stability of the laden vehicle (on HYPERLIFT)
Installation of a hyperlift lead cabin back box
0308M130
-Installation of a box at the back of the cabin with lead ballast to obtain a maximum load on the front axle for better stability of the vehicle under load (on quote based on weight) (on HYPERLIFT)
A sliding side step foot fixed under right side equipment
0308M140
A sliding side step foot fixed under right side equipment to facilitate accessibility
Supplement for pf20 deck length
0309M010
-Supplement for external length of the PF20 platform at 5.10m (only on twin wheel vehicles and subject to authorization on the vehicle's COC)
Supplement for tray length pf30
0309M020
-Supplement for external length of the PF30 platform between 5.20m and 5.50m
Supplement for tray length pf60
0309M030
-Supplement for external length of the plate greater than 7 m (per 100 mm module) on PF60-PF65 plate
Supplement for tray length tp80-100-105-120-150
0309M040
-Supplement for external length of the top greater than 8.50 m (per 100 mm module) on TP80 - TP100 - TP105 - TP120 - TP150 top
Supplement for top width pf18-19-20-21 to 2m20
0309M050
-Supplement for external width of the PF18 - PF19 - PF20 - PF21 platform at 2.20 m
Supplement for width of the tray pf18-19-20-21 to 2m30
0309M060
-Supplement for external width of the platform PF18 - PF19 - PF20 - PF21 at 2.30 m
Supplement for platform width pf30 to 2m30
0309M070
-Supplement for external width of the PF30 platform at 2.30m
Supplement for platform width at 2.55 m
0309M080
Supplement for platform width at 2.55 m
Reinforced aluminium sheet bed with nonslip finish (RIB/NERVURE)
0309M090
Reinforced aluminium sheet bed with nonslip finish (RIB/NERVURE) and full length holes (working width 2000mm)
Extruded aluminium floor type AUTOPORTANT
0309M095
Extruded aluminium floor type AUTOPORTANT (edges with a flat, useful width 2080mm instead of 2000mm) replacing the floor with aluminium tear plates with rib
Modular, galvanised, anti slip 4mm bed type CAILLEBOTIS, 50mm tubular sides
0309M100
Modular galvanised, anti slip 4mm bed type CAILLEBOTIS, 50mm tubular sides and wedging holes over the entire length (no paint on deck)
Modular galvanised, anti slip 3mm bed type CAILLEBOTIS, 10mm flat sides
0309M101
Modular galvanised, anti slip 3mm bed type CAILLEBOTIS, 10mm flat sides and wedging holes over the entire length (no paint on deck)
Deck in sheets metal reinforced LARME 4/6 mm PAINTED, 10mm flat side
0309M105
Deck in sheets metal reinforced LARME 4/6 mm PAINTED, 10mm flat sides and wedging holes over the entire length replacing the deck modular galvanised, 4mm bed type CAILLEBOTIS
Replacement of grating floor with 3/5 galvanized tear sheets
0309M106
-Floor in reinforced sheets with hot-galvanized TEARS, thickness. 3/5, edge edges with 10mm flats and wedge holes over the entire length (useful width 2180mm) to replace the grating type floor (for PF30)
Deck in sheets metal reinforced LARME 4/6 mm PAINTED, 10mm flat sides
0309M110
Deck in sheets metal reinforced LARME 4/6 mm PAINTED, 10mm flat sides and wedging holes over the entire length replacing the deck modular galvanised, 4mm bed type CAILLEBOTIS
Deck in sheets metal reinforced LARME 4/6 mm GALVANIZED, 50mm tubular sides
0309M111
Deck in sheets metal reinforced LARME 4/6 mm GALVANIZED, 50mm tubular sides and wedging holes over the entire length replacing the deck modular galvanised, 4mm bed type CAILLEBOTIS
Deck in sheets metal reinforced LARME 4/6 mm GALVANIZED, 12mm sides with corner piece
0309M115
Deck in sheets metal reinforced LARME 4/6 mm GALVANIZED, 12mm sides with corner piece and wedging holes over the entire length replacing the deck modular galvanised, 4mm bed type CAILLEBOTIS
Replacement grating floor with 5/7 galvanized tear plates
0309M116
-Floor in reinforced sheets with hot-galvanized TEARS, thickness. 5/7, 50mm tubular edge edges and wedge holes to replace the grating type floor (for PF60-PF65)
Deck in ALUMINIUM reinforced sheets, 50mm tubular sides and wedging holes over the entire length replacing the deck modular galvanised, 4mm bed type CAILLEBOTIS
0309M117
Deck in ALUMINIUM reinforced sheets, 50mm tubular sides and wedging holes over the entire length replacing the deck modular galvanised, 4mm bed type CAILLEBOTIS
Sheet steel anti-slip load bed with perforations for fixing blocks, braces
0309M120
Sheet steel anti-slip load bed with perforations for fixing blocks, braces etc.
Deck in sheets metal reinforced LARME 4/6 mm PAINTED, without sides
0309M121
Deck in sheets metal reinforced LARME 4/6 mm PAINTED, without sides and wedging holes over the entire length replacing the sheet steel anti-slip load bed with perforations for fixing blocks and braces (TP80)
Deck in sheets metal reinforced LARME 5/7 mm PAINTED, without sides
0309M122
Deck in sheets metal reinforced LARME 5/7 mm PAINTED, without sides and wedging holes over the entire length replacing the sheet steel anti-slip load bed with perforations for fixing blocks and braces (TP80-TP120)
Deck in sheets metal reinforced GALVANIZED and RIB 4mm
0309M123
Deck in sheets metal reinforced GALVANIZED and RIB 4mm, without edges of banks and holes of blocking along the whole length
Deck in sheets metal reinforced LARME 5/7 mm PAINTED, without sides
0309M125
Deck in sheets metal reinforced LARME 5/7 mm PAINTED, without sides and wedging holes over the entire length replacing the sheet steel anti-slip load bed with perforations for fixing blocks and braces (TP105-TP120-PLAT'SOL TP100)
Deck in sheets metal reinforced LARME 6/8 mm PAINTED, without sides
0309M126
Deck in sheets metal reinforced LARME 6/8 mm PAINTED, without sides and wedging holes over the entire length replacing the sheet steel anti-slip load bed with perforations for fixing blocks and braces (TP150)
Replacement 4/6 tear plate floor with omega wood
0309M130
-WOOD floor with omegas, without edge edges, replacing the floor in reinforced sheet metal with thick tears. 4/6 (PF60-PF65-TP80)
Replacing the sheet steel anti-slip load bed with perforations for fixing blocks by a mixed 5 steel strips + 4 wood floor strips of 215x35 with the possibility of stretching over the entire length and over the entire width
0309M135
Replacing the sheet steel anti-slip load bed with perforations for fixing blocks by a mixed 3 steel strips + 2 wood floor strips of 215x35 with the possibility of stretching over the entire length and over the entire width
Adaptation of two wheel pits in the wheelbase with aluminum closing plates for interlocking floor leveling
0309M136
Adaptation of two wheel pits in the wheelbase with aluminum closing plates for interlocking floor leveling
Omega type side slides on the sides of the tray
0309M140
-OMEGA type side slides on the sides of the deck with 2 adjustable slides and a hauling pulley replacing the original edges
Rear articulation of the floor to improve the loading angle
0309M150
Rear articulation of the floor to improve the loading angle
Positioning the two hydraulic cylinders for tilting the platform on the outside of the chassis
0309M160
Positioning the two hydraulic cylinders for tilting the platform on the outside of the chassis
Reinforcement of the floor by bringing the sleepers together
0309M170
-Reinforcement of the original floor by bringing together the crosspieces
Special floor with waste recovery gutters
0309M180
-Special floor with gutters for collecting liquid waste
Two support rollers at the rear of the equipment under the platform
0309M190
Two support rollers at the rear of the equipment under the platform
Four support rollers at the rear of the equipment under the platform
0309M200
Four support rollers at the rear of the equipment under the platform
Non-slip expanded metal welded and articulated to the rear overhang deck and sliding ramp
0309M210
Non-slip expanded metal welded and articulated to the rear overhang deck and sliding ramp
Four interlocking posts on the sides of the board
0310M010
-Four interlocking posts on the sides of the tray (2 per side) with a storage bin
Six interlocking posts on the sides of the board
0310M020
-Six interlocking posts on the sides of the tray (3 per side) with a storage bin
Eight interlocking posts on the sides of the board
0310M030
-Eight interlocking posts on the sides of the tray (4 per side) with a storage bin
Ten interlocking posts on the sides of the board
0310M040
-Ten interlocking posts on the sides of the tray (5 per side) with a storage bin
Twelve interlocking posts on the sides of the board
0310M050
-Twelve interlocking posts on the sides of the board (6 per side) with a storage bin
Fourteen interlocking posts on the sides of the board
0310M060
-Fourteen interlocking posts on the sides of the tabletop (7 per side) with a storage bin
Six interlocking posts on six extendable crosspieces
0310M070
-Six interlocking posts on six manually extendable crosspieces from 2550 mm to 3000 mm with a locking lock in 3 positions (3 posts per side)
Eight interlocking posts on eight extendable crosspieces
0310M080
-Eight interlocking posts on six manually extendable crosspieces from 2550 mm to 3000 mm with a locking lock in 3 positions (4 posts per side)
Two lateral aluminum side panels (1 per side
0310M090
Two lateral aluminum side removable panels (1 per side) can be fitted between the front of the platform and 1 removable post on the equipment
Two lateral aluminum side panels (1 per side) articulated and pivoting between the front face of the platform and 1 removable post on the side of the equipment
0310M100
Two lateral aluminum side panels (1 per side) articulated and pivoting between the front face of the platform and 1 removable post on the side of the equipment
Four lateral aluminum side removable panels (2 per side)
0310M110
Four lateral aluminum side removable panels (2 per side) can be fitted between the front of the platform and 1 removable post on the equipment
Four lateral aluminum side panels (2 per side) articulated and pivoting
0310M120
Four lateral aluminum side panels (2 per side) articulated and pivoting between the front face of the platform and 2 removable post on the side of the equipment
Six interlocking aluminum side panels
0310M130
-Six aluminum side boards (3 per side) that can be nested between the front face of the platform and 3 removable posts on the bank
Six articulated-pivoting aluminum side panels
0310M140
-Six aluminum side boards (3 per side) articulated and pivoting between the front face of the platform and 2 removable posts on the bank
Eight interlocking aluminum side boards
0310M150
-Eight aluminum side boards (4 per side) that can be nested between the front face of the platform and 4 removable posts on the bank
Eight articulated-pivoting aluminum side panels
0310M160
-Eight aluminum side rails (4 per side) articulated and pivoting between the front of the platform and 4 removable posts on the edge
Rear suspension reinforcement 3t to 5t chassis with blade
0311M010
-Reinforcement of the rear suspension of a 3T to 5T chassis with adaptation of an additional leaf spring
Rear suspension reinforcement 6t to 12t chassis with blade
0311M020
-Reinforcement of the rear suspension of a 6T to 12T chassis with adaptation of a complementary leaf spring
Rear chassis suspension reinforcement with cushion
0311M030
-Reinforcement of the rear suspension of a 3T to 7T chassis with adaptation of 2 additional pneumatic cushions to the leaf springs with separate inflation valves and 2 pressure gauges (without compressor)
Rear chassis suspension reinforcement with cushion+compressor
0311M035
-Reinforcement of the rear suspension of a 3T to 5T chassis with adaptation of 2 additional pneumatic cushions to the leaf springs with separate inflation valves and 2 pressure gauges with electric compressor controlled in the cabin
Adjustable air rear suspension to replace the blades
0311M050
-Pneumatic rear suspension replacing leaf springs, with 2 air cushions, compressor, tank, regulation valve and raising and lowering system to adjust the height of the chassis (PTAC 3T to 5T)
Adaptation of two rubber suspension stops
0311M060
-Adaptation de 2 butées de suspension en caoutchouc sur châssis de 3T à 5T de PTC
Sandblasting and metallization of a 5 to 7m plate
0312M010
-Sandblasting and metallization of a single platform of 5 to 7m (inclusive) (platform only)
Sandblasting and metallization of a 7 to 9m tray
0312M020
-Sandblasting and metallization of a single platform of 7 to 9 m (platform only)
Sandblasting and metallization of a platform with a 6 to 8m floor
0312M030
Sandblasting and metallization of a platform with a 6 to 8 m floor (platform only)
Hot galvanizing of the floor (5 to 7 m platform)
0312M040
- Hot-dip galvanizing of the entire floor in teardrop sheets (plateau 5 to 7 m)
Hot dip galvanizing of the entire sheet metal floor (platform 7 to 9 m)
0312M045
Hot dip galvanizing of the entire sheet metal floor (platform 7 to 9 m)
Hot dip galvanization of the tilting part with sleeper and stand (platform 5 to 7 m)
0312M050
Hot dip galvanization of the tilting part with sleeper and stand (platform 5 to 7 m)
Hot dip galvanization of the tilting part with sleeper and stand (platform 7 to 9 m)
0312M055
Hot dip galvanization of the tilting part with sleeper and stand (platform 7 to 9 m)
Hot dip galvanizing of all the PLAT'FIX TP105 equipment
0312M060
Hot dip galvanizing of all the PLAT'FIX TP105 equipment (subframe, floor, front panel, accessories)
Full aluminum deck without paint
0313M010
-Fully aluminum deck, without paint
Painting of platform side
0313M015
Painting of platform side in standard colour finish RAL
Painting of platform side
0313M020
Painting of platform side in standard colour finish RAL (to define) =
Painting the body in a standard single tone
0313M025
-Painting of the bodywork in a standard RAL standard tone (to be indicated):
Painting of the base and the arm in a standard solid tone
0313M026
-Painting of the base and the arm in a standard plain tone: to be defined (indicate the RAL) (on MAXILIFT)
Frame and underbody painting in an original single tone
0313M027
-Painting of the underbody in an original chassis tone
Supplement for painting the top in a metallic tone and varnish
0313M030
-Painting of the tray in 1 metallic tone and varnish
Supplementary top paint in 2 standard tones
0313M040
-Top painting in 2 standard tones (non-metallic)
Supplement for top paint in 2 metallic and varnish tones
0313M050
-Supplement for painting the tray in 2 metallic and varnish tones
Varnish paint finish for roll-bar and side edges
0313M060
-Varnish paint finish for roll-bar and side edges of the top
Chassis paint supplement in 1 tone differs from the original
0313M070
-Painting of the chassis in a different tone from the original (non-metallic)
Painting of the bodywork in 1 metallic tone and varnish
0313M080
-Painting of the bodywork in 1 metallic tone and varnish (on MAXILIFT)
Body painting in 2 standard tones
0313M090
-Body painting in 2 standard tones (non-metallic) (on MAXILIFT)
Painting of the bodywork in 2 metallic and varnish tones
0313M100
-Painting of the bodywork in 2 metallic and varnish tones (on MAXILIFT)
Supplement for painting in a metallic tone on bodywork
0313M105
-Supplement for painting in a metallic tone on the bodies
Painting of the front bumper in plain white
0313M110
-Painting of the front bumper in solid WHITE
Painting of the front bumper in WHITE and RED
0313M120
Painting of the front bumper in WHITE (same color as the cab) and RED RAL 3002
Painting of the towing arm
0313M130
Painting of the towing arm in a standard color (on MAXILIFT)
Painting of the second part (only) of the towing arm in a standard color
0313M135
Painting of the second part (only) of the towing arm in a standard color RAL (to be indicated) :
Sanding and painting in 1 plain tone of a used crane
0313M140
-Sanding and painting in a standard non-metallic plain tone of a used crane supplied by the customer
Painting the back of the cab in a standard non-metallic color (on chassis from 3T to 7T)
0313M150
Painting the back of the cab in a standard non-metallic color (on chassis from 3T to 7T)
Painting the cab of a 4x4
0313M160
Painting the cab of a 4x4 in a standard non-metallic color (on chassis from 3T to 7T)
Cabin painting of a 3t5 to 7t chassis in 1 plain tone
0313M170
-Cab paint in a standard non-metallic plain tone (on chassis from 3T5 to 7T)
Cab paint on chassis from 7t5 to 19t in 1 plain tone
0313M180
- Cab paint in a standard non-metallic plain tone (on 7T5 to 19T chassis)
Cabin painting on chassis 3t5 to 6t in 2 plain tones
0313M190
-Cab paint in standard non-metallic two-tone colors (on 3T5 to 6T chassis)
Cab paint for chassis from 7t5 to 19t in 2 plain colors
0313M200
-Cab paint in two standard plain non-metallic tones (on chassis from 7T5 to 19T)
Supplement for painting in a metallic tone on the cabin
0313M210
-Supplement for painting in a metallic tone on the cabin
Painting of the stylized aluminum profiles in the wheelbase in a standard color
0313M220
Painting of the stylized aluminum profiles in the wheelbase (painting of toolbox doors not included) in a standard color RAL=
Painting of a tool box door or the control box (unit price)
0313M230
Painting of a tool box door or the control box (unit price) (multiply by the number of boxes to be painted) in a standard color same as the body
