Fiault : Tow truck & Equipment Sales
- Phone +33 (0)2 43 04 72 63
- Opening hours Monday to Friday, 8am - 12pm / 1:30pm - 5:30pm
Fiault : Tow truck & Equipment Sales
Non-contractual pictures. They can differ depending on the equipment, chassis and location of accessories.
Four adjustable wheel clamps on bed
0501M010
Four adjustable wheel clamps on bed
Four adjustable wheel clamps on bed (2 with flat and 2 standard)
0501M011
Four adjustable wheel clamps on bed (2 with flat and 2 standard)
Four adjustable wheel clamps on bed (2 extra large with flat and 2 standard)
0501M012
Four adjustable wheel clamps on bed (2 extra large with flat and 2 standard)
Eight adjustable wheel blocks on bed (4x public works & 4x light vehicle)
0501M020
Eight adjustable wheel blocks on bed (4x public works & 4x light vehicle)
Two adjustable vl blocking wedges on the floor
0501M030
-Two galvanized VL blocking wedges adjustable on the floor
Two low vl blocking wedges with flat
0501M035
-Two low VL blocking wedges (height 95 mm) with galvanized soles adjustable on the floor
Two extra wide low vl blocking wedges with flat
0501M040
-Two low VL blocking blocks (height 95 mm) extra wide with galvanized soles adjustable on the floor
Four adjustable tp blocking wedges on the floor
0501M050
-Four galvanized TP blocking wedges adjustable on the floor
Two vl blocking blocks bolted to the floor
0501M060
-Two galvanized VL blocking wedges adjustable in length to approximately 30 cm bolted to the floor
Sixteen adjustable wheel clamps on the 2 floor level
0501M070
Sixteen adjustable wheel clamps on the 2 floor level
Two wheel dollies type "GO-JACK 5211" (without support) (maximum speed: 10 Km/h)
0502M011
Two wheel dollies type "GO-JACK 5211" (without support) (maximum speed: 10 Km/h)
Two aluminum support on the bar to protect the cabin for two wheel dollies type "GO-JACK 5211" (without dollies)
0502M021
Two aluminum support on the bar to protect the cabin for two wheel dollies type "GO-JACK 5211" (without dollies)
An open support on the equipment for two wheel dollies type "GO-JACK 5211" (without dollies)
0502M031
An open support on the equipment for two wheel dollies type "GO-JACK 5211" (without dollies)
A closed stainless steel storage box with a fixed shelf for two wheel dollies type "GO-JACK 5211" (without dollies)
0502M041
A closed stainless steel storage box with a fixed shelf for two wheel dollies type "GO-JACK 5211" (without dollies)
Two wheel dollies type "CHARIOTTE " (without support)
0502M060
Two wheel dollies type "CHARIOTTE " (without support) (maximum speed: 10 Km/h)
Two aluminum support on the bar to protect the cabin for two wheel dollies type "CHARIOTTE" (without dollies)
0502M070
Two aluminum support on the bar to protect the cabin for two wheel dollies type "CHARIOTTE" (without dollies)
An open support on the equipment for two wheel dollies type "CHARIOTTE" (without dollies)
0502M080
An open support on the equipment for two wheel dollies type "CHARIOTTE" (without dollies)
A closed stainless steel storage box with a fixed shelf for two wheel dollies type "CHARIOTTE" (without dollies)
0502M090
A closed stainless steel storage box with a fixed shelf for two wheel dollies type "CHARIOTTE" (without dollies)
Two wheel dollies type "GO-JACK 6313" (without support)
0502M100
Two wheel dollies type "GO-JACK 6313" (without support) (maximum speed: 10 Km/h)
Two aluminum support on the bar to protect the cabin for two wheel dollies type "GO-JACK 6313" (without dollies)
0502M110
Two aluminum support on the bar to protect the cabin for two wheel dollies type "GO-JACK 6313" (without dollies)
An open support on the equipment for two wheel dollies type "GO-JACK 6313" (without dollies)
0502M120
An open support on the equipment for two wheel dollies type "GO-JACK 6313" (without dollies)
A closed steel storage box with a fixed shelf for two wheel dollies type "GO-JACK 6313"
0502M130
A closed steel storage box with a fixed shelf for two wheel dollies type "GO-JACK 6313" (without dollies)
A closed stainless steel storage box with a fixed shelf for two wheel dollies type "GO-JACK 6313"
0502M135
A closed stainless steel storage box with a fixed shelf for two wheel dollies type "GO-JACK 6313" (without dollies)
Two wheel dollies type "FOURRIERE" (without support) (maximum speed: 50 Km/h)
0502M140
Two wheel dollies type "FOURRIERE" (without support) (maximum speed: 50 Km/h)
An open support on the equipment for two wheel dollies type "FOURRIERE" (without dollies)
0502M150
An open support on the equipment for two wheel dollies type "FOURRIERE" (without dollies)
A closed steel storage box with a fixed shelf for two wheel dollies type "FOURRIERE" (without dollies)
0502M160
A closed steel storage box with a fixed shelf for two wheel dollies type "FOURRIERE" (without dollies)
A towing dolly with inflatable fixed wheels type SPEED DOLLY galvanized 1380 Kg
0502M170
A towing dolly with inflatable fixed wheels type SPEED DOLLY galvanized 1380 Kg (maximum speed: 90 km/h) (without support)
An open support on the equipment for dollies type "SPEED DOLLY " zinc-coated 1380 Kg and for telescopic bars
0502M180
An open support on the equipment for dollies type "SPEED DOLLY " zinc-coated 1380 Kg and for telescopic bars (without trolley) (on equipment excluding 4x4)
An open support on the equipment for dolly type SPEED DOLLY galvanized 1380 Kg and a closed support with hinged cover on each side of the vehicle
0502M190
An open support on the equipment for dolly type SPEED DOLLY galvanized 1380 Kg and a closed support with hinged cover on each side of the vehicle to replace the steps for the telescopic bars (without dolly) (on 4x4)
A special motorcycle wedge with an articulated and adjustable shoe
0503M010
A special motorcycle wedge with an articulated and adjustable shoe for fitting the wheel, 2 ratchet straps, 1 short traction sling, 1 special motorcycle handlebar strap and a storage rack on the equipment
A motorcycle loading cart with support
0503M020
-A motorcycle cargo cart with guide casters, 4 ratchet straps, 1 short traction sling and an equipment storage rack
A motorcycle carrier rail with bracket adaptable to basket
0503M030
-A motorcycle carrier rail with stem and straps adaptable to the basket
Motorcycle kit for SCC type PF3000
0503M040
Motorcycle kit with a wheel shoe, two "MP3" bars and a galvanized motorcycle bar adaptable to the Second Car Carrier SCC, a special strap for handlebars and two stowage straps (on MAXILIFT)
Motorcycle kit SPECIAL for SCC type US on MAXILIFT PF3000
0503M050
SPECIAL Motorcycle kit with a wheel shoe, two "MP3" bars and a galvanized motorcycle bar adaptable to the Second Car Carrier SCC type US, a special strap for handlebars and two stowage straps (on MAXILIFT)
A 2 tons SCC type “AUTOLIFT” galvanised with hydraulic elevation and extension 1200 mm
0504M010
A 2 tons SCC type “AUTOLIFT” galvanised with hydraulic elevation and extension 1200 mm, removeable and adjustable galvanised lift forks, two rollers mounted under the deck, hitch ball diam. 50, two ratchet type straps to secure wheels to the deck
A 3 tons SCC type “HYDROLIFT” galvanised with hydraulic elevation and extension 1200 mm
0504M020
A 3 tons SCC type “HYDROLIFT” galvanised with hydraulic elevation and extension 1200 mm, removeable and adjustable galvanised lift forks, two rollers mounted under the deck, hitch ball diam. 50, two ratchet type straps to secure wheels to the deck
A 3td hydrolift tow basket
0504M030
-A HYDROLIFT 3TD towing basket with hydraulic elevation with 2 cylinders, double hydraulic extension to 1800 mm by sliding the support frame, width-adjustable wheel forks, a double clevis hitch + ball adaptable to the crossbar of the basket with 2 pins, 2 wheel straps (elevation without hatch in the floor, weight = 500 kg) (adaptable on PF60-PF65-TP)
A 4 tons SCC type “HYDROLIFT” galvanised with hydraulic elevation
0504M040
A 4 tons SCC type “HYDROLIFT” galvanised with hydraulic elevation and extension 1200 mm, removeable and adjustable galvanised lift forks, two rollers mounted under the deck, 4 chassis and axle lift forks, hitch ball diam. 50, two ratchet type straps to secure wheels to the deck (weight = 450 Kg)
A hydrolift 4td tow basket
0504M050
-A HYDROLIFT 4TD towing basket with hydraulic elevation with 2 cylinders, double hydraulic extension to 1800 mm by sliding the support frame, wheel forks adjustable in width, a double clevis towing hook + adaptable ball on the basket crossmember with 2 spindles, 2 wheel straps (elevation without hatch in the floor, weight= 550 kg)
A 6T hydrolift towing basket
0504M060
-A HYDROLIFT 6T towing basket with hydraulic elevation with 2 cylinders,
hydraulic extension to 1600 mm, wheel forks adjustable in width, 2 adjustable tool holders, 6 chassis and axle lifting forks, a double clevis towing hook + adaptable ball on the basket crossmember with 2 pins, 2 wheel straps , with radio control
A 10t hydrolift towing basket
0504M070
-A HYDROLIFT 10T towing basket with hydraulic elevation with 2 cylinders, hydraulic extension to 1600 mm, width-adjustable wheel forks, 2 adjustable tool holders, 6 chassis and axle lifting forks, a double clevis hitch + ball adaptable on the crossbar of the basket with 2 pins, 2 wheel straps, with radio control
A combilift 2T boom-basket combination
0504M075
-A COMBILIFT 2T boom-basket combination with hydraulic elevation with 2 cylinders, hydraulic extension to 1200 mm, wheel forks adjustable in width, crane head with pulley, cable guide rollers and support, a double clevis + ball hitch hook adaptable on the crossbar of the basket with 2 pins, 2 wheel straps (weight= 400 kg)
A 3 tons SCC type “Combilift” galvanised combination lift with hydraulic elevation and extension 1200mm
0504M080
A 3 tons SCC type “Combilift” galvanised combination lift with hydraulic elevation and extension 1200mm, removeable and adjustable galvanised lift forks, crane head with pulley and two rollers mounted under the deck, hitch ball diam. 50, two ratchet type straps to secure wheels to the deck
A combilift 3T boom-basket combination
0504M090
-A combined COMBILIFT 3TD boom-basket with hydraulic elevation with 2 cylinders, double hydraulic extension to 1800 mm by sliding the support frame, wheel forks adjustable in width, crane head with pulley, cable guide rollers and support, a hook double clevis hitch + adaptable ball on the basket crossbar with 2 pins, 2 wheel straps (elevation without hatch in the floor, weight = 600 kg)
A 4 tons SCC type “Combilift” galvanised combination lift with hydraulic elevation
0504M100
A 4 tons SCC type “Combilift” galvanised combination lift with hydraulic elevation and extension 1200mm, removeable and adjustable galvanised lift forks, 4 chassis and axle lift forks, crane head with pulley and two rollers mounted under the deck, hitch ball diam. 50, two ratchet type straps to secure wheels to the deck
A combilift 4TD boom-basket combination
0504M110
-A combined COMBILIFT 4TD boom-basket with hydraulic elevation with 2 cylinders, double hydraulic extension to 1800 mm by sliding the support frame, wheel forks adjustable in width, crane head with pulley, cable guide rollers and support, a hook double clevis hitch + adaptable ball on the basket crossbar with 2 pins, 2 wheel straps (elevation without hatch in the floor, weight = 650 kg)
Replacement of standard basket with boom-basket combination
0504M120
-Replacement of the standard HYDROLIFT basket with a combined boom-basket with COMBILIFT type crane head
Double hydraulic extension of the SCC to 1800 mm to allow the use of the manual or hydraulic ramps (PF60-PF65)
0504M130
Double hydraulic extension of the SCC to 1800 mm to allow the use of the manual or hydraulic ramps (PF60-PF65)
US type basket Second Car Carrier SCC with hydraulically articulated forks and remote control
0504M140
US type basket Second Car Carrier SCC with hydraulically articulated forks and remote control replacing the standard SCC (on MAXILIFT)
A removable part adaptable to the Second Car Carrier with 2 pins and vertical spades for planting in the ground by lowering the Second Car Carrier
0504M150
A removable part adaptable to the Second Car Carrier SCC with 2 pins and vertical spades for planting in the ground by lowering the Second Car Carrier with a support on the equipment and replacing the single-acting valve with a double-acting valve for the lifting cylinders of the SCC
A vl tow bar with supports
0505M010
- A VL tow bar with ball hitch and an external support
A pl tow bar with supports
0505M020
-A PL tow bar with 2 rings and an external support
A pl tow bar with storage sleeve
0505M030
- A HGV tow bar with 2 rings and a storage sleeve integrated into the bodywork (on HYPERLIFT)
Two small aluminium ramps 700x250 mm with support on equipment for loading vehicles on the platform with trolleys
0506M010
Two small aluminium ramps 700x250 mm with support on equipment for loading vehicles on the platform with trolleys
Two aluminum ramps 1000x270 mm to improve the loading angle
0506M020
Two aluminum ramps 1000x270 mm to improve the loading angle with a storage tray under the equipment
Two aluminum ramps 1250x500 mm adaptable at the end of the platform to allow the overflow of the wheels of the transported vehicle with a support under the equipment
0506M030
Two aluminum ramps 1250x500 mm adaptable at the end of the platform to allow the overflow of the wheels of the transported vehicle with a support under the equipment
Two 1500x500 aluminum stacking ramps adaptable to the front
0506M040
-Two aluminum stacking ramps 1500x500 mm adaptable on the front side of the tray with a storage bin under the tray
Two 1500x500 aluminum stacking ramps with a ladder
0506M050
-Two aluminum stacking ramps 1500x500 mm with a height adjustment scale adaptable and adjustable on the holes in the floor with a storage bin under the tray
Two hydraulic rear ramps in galvanized steel without holes
0506M080
Two hydraulic rear ramps in galvanized steel without holes, hydraulically sliding in separate drawers on the left and right under the floor (weight = 300 kg)
Two 1800mm correction ramps in cast smooth steel. Hydrau.
0506M090
-Two rear angle correction ramps in 1 part in hot-dip galvanized reinforced sheet metal, length 1800mm (without holes), sliding hydraulically in separate drawers on the left and right under the floor (weight = 550 kg)
Two hydr. smooth steel correction ramps. 2 parts
0506M095
-Two rear angle correction ramps in 2 articulated parts in hot GALVANIZED TEARS reinforced sheets (without holes), sliding hydraulically in separate drawers on the left and right under the floor (weight = 500 kg)
Transformation of the front part of a loading trailer without unhooking
0506M096
-Transformation of the front part of the trailer for loading without unhooking
Hydraulically and articulated rear overhang platform with a hydraulic loading ramp
0506M100
Hydraulically and articulated rear overhang platform and adjustable in height from the ground up to 20 ° above the horizontal level with a fully hydraulic loading ramp
A 3rd central loading ramp in aluminium
0506M110
A 3rd central loading ramp in aluminium
Replacement of standard loading ramps with reinforced aluminium ramps
0506M115
Replacement of standard loading ramps with reinforced aluminium ramps
Replacement of loading adjustable ramp in width by non-adjustable ramps with two "shutters" for vehicles with trailer
0506M116
Replacement of loading adjustable ramp in width by non-adjustable ramps with two "shutters" for vehicles with trailer
Replacement of the integral ramp in one part by 2 separate ramps Left and Right
0506M120
Replacement of the integral ramp in one part by 2 separate ramps Left and Right with a hydraulic cylinder allowing the widening in width
Two connecting ramps at the front between trailer and truck
0506M130
-Two sliding connecting ramps at the front between the trailer and the truck
Two integral sliding loading ramps tp105
0506M140
-Two full-width loading ramps, sliding hydraulically into each other (2x1200mm), inside the articulated panel by means of 2 double-acting cylinders controlled by distributors and radio control
Replacement of the two manual pivoting ramps by an integral hydraulically sliding ramp
0506M150
Replacement of the two manual pivoting ramps by an integral hydraulically sliding ramp with two hydraulic cylinders powered by an electric pump and a remote control (for PF19-PF21)
Two aluminum load ramps with hydraulic pivoting
0506M160
Two aluminum load ramps with hydraulic pivoting
Two interlocking rubber bumpers in front of the winch
0507M010
-Two rubber bumpers on two interlocking tubes in front of the winch
A fixed ball hook diam. 50 on the front of the platform
0508M010
A fixed ball hook diam. 50 on the front of the platform
A hook-mixed screed diam. 50 + ball hitch at the front of the equipment
0508M020
A hook-mixed screed diam. 50 + ball hitch at the front of the equipment
A fixed axle+ball towing hook on the front
0508M025
-An axle hitch + fixed ball on the front of the tray
An adjustable clevis+ball hitch on the front face
0508M030
-A double clevis hitch + adjustable ball on the front face of the platform on reinforced crosspiece
A fixed ball hook diam. 50 on the rear of the equipment
0508M040
A fixed ball hook diam. 50 on the rear of the equipment
A hook-mixed screed diam. 50 + ball hitch at the rear of the equipment
0508M050
A hook-mixed screed diam. 50 + ball hitch at the rear of the equipment
An adjustable clevis + ball hitch at the rear
0508M060
-A double clevis towing hook + ball diam. 50 adjustable at the rear of the tray on reinforced crosspiece
A rockinger towing hook diam.40 fixed at the rear
0508M070
-A ROCKINGER mixed towing hook diam. 40 + ball diam. 50 fixed at the rear
A Rockinger tow hook for a trailer with a Ø 50 ring installed on a fixed crosstie at the rear of the equipment
0508M080
A Rockinger tow hook for a trailer with a Ø 50 ring installed on a fixed crosstie at the rear of the equipment
A bna 68 towing hook fixed at the rear
0508M090
- A BNA 68 (or MG) type towing hook installed on a fixed crossbeam at the rear between the supports of a sliding platform (with pneumatic control)
Remote control for opening and closing of 1 hook
0508M110
- Remote control in lateral position for pneumatic opening and closing of a ROCKINGER type tow hook or similar (without hook)
A diam.50 variobloc towing hook and 3t5 rockinger
0508M120
-A double VARIOBLOC towing hook with ball diam.50 and ROCKINGER 3T5 diam.40
A removable hyperlift towing crossmember
0508M140
-A removable towing crossmember, adaptable between the rear stands using 2 axles and equipped with a ROCKINGER towing hook capacity 20 T (on Hyperlift)
A special semi-trailing adapter per hyperlift pivot
0508M150
-A special adapter allowing the towing of a semi-trailer by the pivot with a support in a trunk (on Hyperlift)
A special semi-towing adapter by hyperlift fifth wheel
0508M160
-A special adapter allowing the towing of a road tractor by the fifth wheel with a support in a trunk (on Hyperlift)
A hydraulically expandable tow hook for equipment PLAT'FIX 2+3
0508M170
A hydraulically expandable tow hook for equipment PLAT'FIX 2+3
Two PUSH-PULL hydraulic power outlets located at the rear of the chassis with an additional hydraulic distributor and 2 flexible hoses for a trailer power supply
0509M010
Two PUSH-PULL hydraulic power outlets located at the rear of the chassis with an additional hydraulic distributor and 2 flexible hoses for a trailer power supply
An electrical outlet with 2 cables + and - for trailer
0509M020
-An electrical outlet with 2 cables + and - connected to the battery to supply a trailer
Hydraulic extension of the trailer tongue by cylinder
0509M030
-Hydraulic extension of the boom by double-acting cylinder (Trailer)
Pneumatic trailer tongue lock
0509M040
-Pneumatic locking of the trailer boom (Trailer)
Replacement of the original 4 wheels with ALUMINUM rims reinforced GREY color with tires supply (4 wheels on 4x4)
0510M010
Replacement of the original 4 wheels with ALUMINUM rims reinforced GREY color with tires supply (4 wheels on 4x4)
Replacement of the original 4 wheels with ALUMINUM wheels reinforced in GREY
0510M020
Replacement of the original 4 wheels with ALUMINUM wheels reinforced in GREY
Replacement of the original 4 wheels by BLACK STEEL wheels reinforced
0510M030
Replacement of the original 4 wheels by BLACK STEEL wheels reinforced
Replacement of the original 4 wheels by BLACK STEEL wheels reinforced with tire supply (4 wheels on 4x4)
0510M040
Replacement of the original 4 wheels by BLACK STEEL wheels reinforced with tire supply (4 wheels on 4x4)
A cabover with deck in sheets metal reinforced LARME 4/6 mm GALVANIZED
0511M010
A cabover with deck in sheets metal reinforced LARME 4/6 mm GALVANIZED without holes, articulated and hydraulically liftable with 2 hydraulic cylinders and a hand pump positioned at the back of the cabin on the right side
Two sliding aluminum ramps under the alcove
0511M020
-Two sliding aluminum ramps under the overcab in individual drawers
Two pivoting aluminum ramps at the rear of the overcab
0511M030
-Two pivoting aluminum ramps at the rear of the cabover with a horizontal position keeping system
Type 1 half stage with height and tilt adjustment
0511M040
Type 1 half stage with height and tilt adjustment. Front part via oblique rails. Rear part via two pistons with hydraulic locks and locking pins. Detachable anti-fall posts (weight = 1000 kg)
Type 2 half stage with height and tilt adjustment
0511M050
Type 2 half stage with height and tilt adjustment. Front part via post lifts. Rear part via two pistons with hydraulic locks and locking pins. Detachable anti-fall posts (weight = 1100 kg)
Half-stage type 3
0511M060
Type 3 half-stage with elevation of the front part with 2 hydraulic cylinders and chains in 2 vertical posts and elevation of the rear part with 2hydraulic cylinders. Front and rear height adjustments in all positions with mechanical locks at the front and mechanical locks at the rear ends. Detachable anti-fall posts (weight = 1200 kg)
Half stage type 4 with elevation by 2 screws and 2 cylinders
0511M070
-Half floor type 4 with elevation of the front part by 2 screw columns and hydraulic motor in 2 vertical posts and elevation of the rear part with 2 hydraulic cylinders. Detachable anti-fall posts (weight = 1500 kg
Type 5 floor with elevation by 2 screws, 2 jacks and 2 arms
0511M075
-Type 5 floor with elevation of the front part by means of 2 screw columns and hydraulic motor in 2 vertical posts and elevation of the rear part by 2 double-acting cylinders and 2 complementary guide arms. Front and rear height adjustments in all positions with automatic locking on the front and mechanical locking on the rear sheaths. Removable fall arrest posts (weight= 2300 kg)
Positive hydraulic stacker at the front of the deck with articulation of the front part with a fixed point at 400 mm height and elevation of the rear part by 2 hydraulics cylinders
0511M080
Positive hydraulic stacker at the front of the deck with articulation of the front part with a fixed point at 400 mm height and elevation of the rear part by 2 hydraulics cylinders with and manual locking system at different heights. Removable fall arrest posts (for PLAT'SOL COVERED BODY)
Two hydraulic extension drawers of the 1200mm floor
0511M100
-Two shelf length extension drawers, hydraulically adjustable towards the rear with an extension of 1200 mm (on type 4 floor only)
Two stage hydraulic extension drawers of 2000mm
0511M110
-Two shelf length extension drawers, hydraulically adjustable towards the rear with an extension of 2000 mm (on Plat'Fix 2+3)
Stacking system for a 6th car with hinge on the back of the cab and rear lift with 2 hydraulics cylinders and an additional adjustment of length following the wheelbase of the vehicle
0511M120
Stacking system for a 6th car with hinge on the back of the cab and rear lift with 2 hydraulics cylinders and an additional adjustment of length following the wheelbase of the vehicle with a hydraulic central cylinder by remote control and combined with 2 floor pits hinged and lowered with 2 hydraulics cylinders controlled on manual distributors (on 26T chassis cab)
Synchronized manual lowering of anti-fall posts on two sides (on Plat'Fix)
0511M130
Synchronized manual lowering of anti-fall posts on two sides (on Plat'Fix)
