Fiault : Tow truck & Equipment Sales
- Phone +33 (0)2 43 04 72 63
- Opening hours Monday to Friday, 8am - 12pm / 1:30pm - 5:30pm
Fiault : Tow truck & Equipment Sales
Non-contractual pictures. They can differ depending on the equipment, chassis and location of accessories.
A vl lashing strap with 1 ring at each end
0601M010
-A VL lashing strap with 1 ring at each end 600x50mm
A vl lashing strap with 1 hook at each end
0601M020
-A VL lashing strap with 1 hook at each end 600x50mm
A 2m vl lashing strap with a hook
0601M030
-A 2m VL lashing strap with a hook (without ratchet)
A vl lashing strap with 1 hook and 1 ratchet
0601M040
-A VL lashing strap with 1 hook at one end and 1 ratchet 2000x50mm
A vehicle lashing strap around the wheel with 1 buckle + ratchet
0601M045
-A VL wheel lashing strap with 1 sliding buckle and 1 ratchet 2500x50mm
A 3 points lashing strap for light vehicle
0601M050
A 3 points lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 3000x50mm
Two 3-point vl lashing straps
0601M051
-Two 3-point VL lashing straps with 2 hooks and 1 ratchet 3000x50mm
Ten 3 points lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 3000x50mm
0601M052
Ten 3 points lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 3000x50mm
A special lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 1200x35mm
0601M055
A special lashing strap for light vehicle with 1 buckle, 1 hook and 1 ratchet 1200x35mm
Two special vl lashing straps for aluminum rim
0601M056
-Two VL lashing straps special for aluminum rims with 1 buckle, 1 hook and 1 ratchet 1200x35mm
A narrow vl lashing strap with 2 hooks + ratchet
0601M060
-A narrow VL lashing strap with 2 hooks and 1 ratchet 3000x25mm
A special vl lashing strap for motorcycle handlebars
0601M065
-A special VL lashing strap for motorcycle handlebars 3600x35mm
A special truck lashing strap for baskets
0601M070
-A special VL basket lashing strap (maxi 6T) with 1 buckle and 1 ratchet with 1 hook 2000x50mm
A pl lashing chain with shortener
0602M010
-A PL lashing chain with shortener length: 2000mm
A special pl lashing strap for 10t baskets
0602M020
-A special 10T basket PL lashing strap with 1 strap with 2 hooks 1500x75mm, 1 strap with 1 buckle 3000x75mm and a ratchet
Hyperlift pl stowage accessories kit
0602M030
Complete kit of complementary accessories on HYPERLIFT including:
-2 chains diam. 10, length 10m with hooks and shackles
-2 chains diam. 16, length 10m with hooks and shackles
-2 wide straps, length 10m, capacity 10T
-1 20T reeving pulley
A 2-strand v-shaped traction chain
0603M010
-A 2-strand V-shaped pull chain with 1 ring and 2 butcher J hooks
A long 2-strand v-shaped traction chain
0603M020
-A long 2 strand V pull chain with 1 ring with 2 small hooks and 2 butcher J hooks
Two tie-down heads recessed into the floor
0604M010
-Two tie-down heads recessed into the floor (1 per side)
Four tie-down heads recessed into the floor
0604M020
-Four tie-down heads recessed into the floor (2 per side)
Six tie-down heads embedded in the floor
0604M030
-Six tie-down heads recessed into the floor (3 per side)
Eight tie-down heads embedded in the floor
0604M040
-Eight tie-down heads recessed into the floor (4 per side)
Ten-heads stowage embedded in the floor for your chains (5 per side)
0604M050
Ten-heads stowage embedded in the floor for your chains (5 per side)
Twelve tie-down heads embedded in the floor
0604M060
-Twelve tie-down heads recessed into the floor (6 per side)
A 6T ring of hauling welded front of the winch
0604M070
A 6T ring of hauling welded front of the winch
Two 3T lashing rings articulated and welded on the floor (1 per side)
0604M080
Two 3T lashing rings articulated and welded on the floor (1 per side)
Two fastening rings in the aluminium floor (2 at the rear)
0604M081
Two fastening rings in the aluminium floor (2 at the rear)
Two 3T lashing rings articulated and integrated on the floor (1 per side)
0604M085
Two 3T lashing rings articulated and integrated on the floor (1 per side)
Two 8t lashing rings welded to the floor
0604M086
-Two 8T tie-down rings hinged and welded to the floor (1 per side)
Two 8t lashing rings embedded in the floor
0604M087
-Two 8T tie-down rings articulated and recessed on the floor (1 per side)
Four 3T lashing rings articulated and welded on the floor (2 per side)
0604M090
Four 3T lashing rings articulated and welded on the floor (2 per side)
Four fastening rings in the aluminium floor (2 in the middle + 2 at the rear)
0604M091
Four fastening rings in the aluminium floor (2 in the middle + 2 at the rear)
Four 3T lashing rings articulated and integrated on the floor (2 per side)
0604M095
Four 3T lashing rings articulated and integrated on the floor (2 per side)
Four 8t lashing rings welded to the floor
0604M096
-Four 8T tie-down rings hinged and welded to the floor (2 per side)
Four 8t lashing rings embedded in the floor
0604M097
-Four 8T tie-down rings articulated and embedded in the floor (2 per side)
Six 3T lashing rings articulated and welded on the floor (3 per side)
0604M100
Six 3T lashing rings articulated and welded on the floor (3 per side)
Six interlocking anchors in aluminum floor (pf20)
0604M101
-Six interlocking anchors in the aluminum floor (2 at the front + 2 in the middle + 2 at the rear)
Six 3T lashing rings articulated and integrated on the floor (3 per side)
0604M105
Six 3T lashing rings articulated and integrated on the floor (3 per side)
Six 7T lashing rings articulated and welded on the floor (3 per side)
0604M106
Six 7T lashing rings articulated and welded on the floor (3 per side)
Six 8t lashing rings embedded in the floor
0604M107
-Six 8T tie-down rings articulated and embedded in the floor (3 per side)
Eight 3T lashing rings articulated and welded on the floor (4 per side)
0604M110
Eight 3T lashing rings articulated and welded on the floor (4 per side)
Eight 3t lashing rings embedded in the floor
0604M115
-Eight 3T tie-down rings articulated and recessed into the floor (4 per side)
Eight hitch hooks 7T welded on the floor of platform (4 per side)
0604M116
Eight hitch hooks 7T welded on the floor of platform (4 per side)
Eight 8t lashing rings embedded in the floor
0604M117
-Eight 8T tie-down rings articulated and embedded in the floor (4 per side)
Ten 3t lashing rings embedded in the floor
0604M125
-Ten 3T tie-down rings articulated and embedded in the floor (5 per side)
Ten 7T lashing rings articulated and welded on the floor (5 per side)
0604M126
Ten 7T lashing rings articulated and welded on the floor (5 per side)
Ten 8t lashing rings embedded in the floor
0604M127
-Ten 8T tie-down rings articulated and embedded in the floor (5 per side)
Twelve 3t lashing rings welded to the floor
0604M130
-Twelve 3T tie-down rings hinged and welded to the floor (6 per side)
Twelve 3t tie-down rings embedded in the floor
0604M135
-Twelve 3T tie-down rings articulated and embedded in the floor (6 per side)
Twelve 8t lashing rings welded to the floor
0604M136
-Twelve 8T tie-down rings hinged and welded to the floor (6 per side)
Twelve 8t lashing rings embedded in the floor
0604M137
-Twelve 8T tie-down rings articulated and embedded in the floor (6 per side)
Hanging systems straps welded under the top of the two sides for securing with straps
0604M140
Hanging systems straps welded under the top of the two sides for securing with straps
Strap attachment system with 6 ratchet tensioners
0604M150
-Strap attachment system with 6 ratchet tensioners under the deck
Adaptation of a twist lock crossbar fitted to the front
0604M160
-Adaptation of a twist-lock crossbar embedded in the front of the platform for transporting a 20-foot container
Adaptation of 2 twist lock crossbars fitted to the front and rear
0604M170
-Adaptation of 2 twist-lock crosspieces fitted at the front and rear of the platform for transporting a 20-foot container
Two 13t lashing rings welded to the floor
0604M180
-Two 13T tie-down rings hinged and welded to the floor (1 per side)
Four 13t lashing rings welded to the floor
0604M190
-Four 13T tie-down rings hinged and welded to the floor (2 per side)
A lifting beam with 2 straps
0606M010
-A manual lifting spreader with a capacity of 2800Kg, foldable in 3 parts, 2 removable arms, width 2400mm, a manual central rotor, 2 nylon straps 3000X300 with 4 height adjustment buckles and a support at the front of the platform
A lifting beam, removable arms, 4 claws
0606M020
-A manual lifting spreader with a capacity of 2800Kg, foldable in 3 parts, 2 removable arms, width 2400mm, a manual central rotor, 4 lifting claws for wheels with 4 height adjustment buckles and a support at the front of the platform
A hydraulic lifting beam, 4 claws
0606M030
-A hydraulic lifting beam with a capacity of 3500Kg, a manual central rotor, a hydraulic center of gravity adjustment cylinder, 4 removable arms adjustable in width from 2300mm to 2700mm, 4 lifting claws for wheels with 4 height adjustment buckles and a support at the front of the platform (for crane with a rotator, 2-element distributors and supply hoses installed) (Rotator to be added)
A CRANELIFT lifting boom built into the floor with 2 lifting hydraulic cylinders
0607M010
A CRANELIFT lifting boom built into the floor with 2 lifting hydraulic cylinders, a hydraulically expandable tube with a swivel head and double pulley (weight = 1000 kg)
Manually extendable lifting boom with pivoting crane head
0607M013
Manually extendable lifting boom with pivoting crane head (on MAXILIFT PF3000)
A manually sliding arrow under the tray
0607M014
-A 1000 kg boom manually sliding under the platform with a pivoting crane head (on PF18-PF20-PF30)
Hydraulically extendable boom lift with swiveling crane head (on MAXILIFT PF3000)
0607M015
Hydraulically extendable boom lift with swiveling crane head (on MAXILIFT PF3000)
A hydraulic lifting boom for maxilift pf10000
0607M016
-A hydraulically extendable lifting boom with two pivoting crane heads
A type 1 lifting boom hydraulically extendable over 3500mm with double pivoting crane head
0607M017
A type 1 lifting boom hydraulically extendable over 3500mm with double pivoting crane head, with manual control on distributor and additional radio remote control (on Hyperlift)
A type 2 lifting boom hydraulically extendable in 2 parts over 6000mm with double pivoting crane head
0607M018
A type 2 lifting boom hydraulically extendable in 2 parts over 6000mm with double pivoting crane head, with manual control on distributor and additional radio remote control (on Hyperlift)
Connecting the hydraulic circuit to an existing crane
0607M020
-Connection of the hydraulic circuit of the equipment to the circuit of an already installed crane, with installation of a 3-way valve and hydraulic hoses
Installation of a hydraulic crane
0607M030
-Installation of a hydraulic crane supplied by the customer, with manufacturing of a special subframe with lateral fixing plates and connection to the hydraulic circuit of the equipment with a 3-way valve, without electrical connections, without starting adjustments and receipt of conformity to be made by the seller of the crane
PRICE DEPENDING ON CRANE TYPE
Installation of a rear support crossmember (supplied)
0607M035
-Installation of a rear support crossmember with hydraulic connections to the crane distributors (crossmembers and cylinders supplied with the customer's crane)
A hydraulic rotator at the end of the crane
0607M040
-A hydraulic rotator at the end of the crane (for a crane equipped with a distributor and hoses)
A hydraulic hauling winch with a force of 1.5t on a crane
0607M050
-A 1.5 T hydraulic hauling winch, installed on the arm of the crane, with 30m of cable diam 10, a remote control by wire on an electro-valve connected to the hydraulic circuit of the crane (ON QUOTE ACCORDING TO CRANE)
A radio control for the hydraulic winch of the crane
0607M060
-A 1.5 T hydraulic hauling winch, installed on the arm of the crane, with 30m of cable diam 10, a remote control by wire on an electro-valve connected to the hydraulic circuit of the crane (ON QUOTE ACCORDING TO CRANE)
A proportional radio crane control
0607M065
-A RADIO control for Elevation-Rotation-Extension of the crane with oil cooler and high pressure filter
Acceptance of the crane by an approved organization with tests
0607M070
-Receipt of the crane by an approved organization with capacity tests, empty and loaded tests (only on cranes sold by us)
Hydraulic extension of the front stabilizers
0607M080
-Hydraulic extension of the front stabilizers
Fixed rear support crossmember with 2 stabilizing cylinders.
0607M090
-Fixed rear support crossmember with 2 stabilizing cylinders with separate controls on the crane distributors
Crane color other than original
0607M100
-Color of the crane other than the original one
Supply of an aluminum ladder with supports on the equipment
0607M110
Supply of an aluminum ladder with supports on the equipment
Supply of two crane support plates
0607M120
-Supply of two nylon crane support plates with a storage rack on the equipment
Supply and installation of a hydraulic crane behind the cabin
0607M130
Supply and installation of a hydraulic crane behind the cabin (capacity of the crane to define) with manufacture of a special subframe with side fixing plates and connection to the hydraulic circuit of the equipment without valve using a special variable hydraulic distributor, electrical connections, set-up, adjustments and acceptance of conformity by us
