Fiault : Tow truck & Equipment Sales
- Phone +33 (0)2 43 04 72 63
- Opening hours Monday to Friday, 8am - 12pm / 1:30pm - 5:30pm
Fiault : Tow truck & Equipment Sales
Non-contractual pictures. They can differ depending on the equipment, chassis and location of accessories.
Two jumper cables with a 12V plug on the front right of the equipment
1202M010
Two jumper cables with a 12V plug on the front right of the equipment
Two jumper cables with two 12V and 24V plugs on the front right of the equipment
1202M020
Two jumper cables with two 12V and 24V plugs on the front right of the equipment
Two jumper cables with a 12V plug in the right rear overhang of the equipment
1202M030
Two jumper cables with a 12V plug in the right rear overhang of the equipment
Two jumper cables with two 12V and 24V plugs in the right rear overhang of the equipment
1202M040
Two jumper cables with two 12V and 24V plugs in the right rear overhang of the equipment
Two jumper cables with two 12V and 24V plugs on the front left and right of the equipment (on each side)
1202M050
Two jumper cables with two 12V and 24V plugs on the front left and right of the equipment (on each side)
A booster propulstation 12V 800A with charging station
1202M060
A booster propulstation 12V 800A with charging station installed in a toolbox already provided on the equipment
A booster propulstation 12V 1200A with charging station
1202M070
A booster propulstation 12V 1200A with charging station installed in a toolbox already provided on the equipment
A booster propulstation 12V/24V 2400/1200A with charging station
1202M080
A booster propulstation 12V/24V 2400/1200A with charging station installed in a toolbox already provided on the equipment
A toolbox with support for booster type PROPULSTATION 12V /24V 2400 / 1200A
1202M090
A toolbox with support for booster type PROPULSTATION 12V /24V 2400 / 1200A with charging station (without booster)
A 220V charging unit with a 12V socket for charging the PROPULSTATION 12V booster in the workshop
1202M100
A 220V charging unit with a 12V socket for charging the PROPULSTATION 12V booster in the workshop (charging the booster at least once a week)
Pneumatic reel (connected to the circuit) with 10m hose
1204M010
Pneumatic reel (connected to the circuit) with 10m hose, pressure gauge in a toolbox already provided on the equipment
Installation of an air intake in the hydraulic controls toolbox
1205M020
Installation of an air intake in the hydraulic controls toolbox
Installation of an air compressor with hose and pressure gauge
1205M030
Installation of an air compressor with hose and pressure gauge
